TPT-3000EQ 1 Ohm
+ DSP 2.4X

$293.36

Package Includes:
1x TPT-3000EQ 1 Ohm
1x PRV Audio DSP 2.4X

In stock

PRICE FOR SINGLE UNIT

SKU: TPT-3000EQ 1 Ohm + DSP 2.4X Categories: ,

Description

TPT-3000EQ 1 Ohm – 3000 Watts Amplifier

 

Small Footprint Technology! Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D full range amplifier.
  • Number of Channels: 1
  • RMS Power at 1 Ohm 12.6V: 3000W RMS
  • RMS Power at 2 Ohm 12.6V: 2100W RMS
  • RMS Power at 4 Ohm 12.6V: 1150W RMS
  • Supply Voltage: 9.5 ~ 15Vdc
  • Frequency Response: 10Hz ~ 25KHz
  • Crossover Low Pass: 50Hz ~ 25KHz
  • Crossover High Pass: 10Hz ~ 700Hz
  • Signal to Noise: 90 dB
  • Harmonic Distortion: 0.9 % THD
  • Input Sensitivity: 0.2V
  • Input Impedance: 12K OHMS
  • Impedance Output: 1 OHM
  • Consumption with Signal Musical: 2A ~ 140A
  • Consumption with Signal Bass: 2A ~ 280A
  • Dimensions (L x W x H): 8.75” x 7.40” x 3”
  • Weight: 5.30 Lbs

Features:

The TPT-3000EQ offer 1 channel with advanced individual equalization features for Bass, Mid Bass and Mid High, plus the traditional Level, High Pass and Low Pass features. Its Full Range frequency response from 10Hz to 25KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters. Use the guide Below for recommended applications, where you can get the full potential of your amplifier.


DSP 2.4X – 4 Channel Digital Signal Processor

Bringing innovation and technology to the Automotive Sound market, PRV Audio launches the DSP2.4X Digital Signal Processor, capable of making various adjustments, from filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. Enhancing Your Audio System!

Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.4X features 2 audio inputs (A and B) and 4 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).

DSP2-4X- HIGHLIGHTS

For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª).

To aid in the protection of amplifiers and loudspeakers, the DSP 2.4X features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.

In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.4X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.
It also has the functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.


Sequencer Feature

Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG.  The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.

Troubleshooting

Troubleshooting

For more information click the links below to visit the product page:
TPT-3000EQ 1 Ohm – 3000 Watts Amplifier
DSP 2.4X – 4 Channel Digital Signal Processor

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov